Summary
ZEQUO 5410DL is a Layer 3 Ethernet Switch with management function having 100BASE-TX/1000BASE-T/10GBASE-T ports and SFP+ extension slots.
Feature
(1) Has wire-speed Layer 3 switching function.
(2) Ports 1 to 4 are 100BASE-TX/1000BASE-T/10GBASE-T ports corresponding to auto-negotiation. Also their speed and communication mode can be switched by configuration.
(3) Ports 5 to 16 are SFP+ extension slots. They are capable of 10Gbps communications. They can be used as SFP or SFP+ ports.
(4) If the stacking functions have been activated, ports 15 and 16 can be stacked. By using the SFP+ modules and the optical fiber cables, or the SFP+ direct attach cables, stacking connections are feasible for up to a maximum of two units whereas the ZEQUO 5410DL are used.
(5) Settings and firmware can be changed and saved by using an SD card.
(6) Equipped with two power ports, power redundancy is feasible. Normally operates even with just the AC power supplied to either one of the power ports.
(7) All twisted pair ports support straight/cross cable auto sensing function. Simply connect devices with straight cables, whether it is a terminal or a network device. (This function does not work if the port communication configuration is set at Fixed or Link Aggregation.)
(8) Equipped with energy efficient Ethernet (EEE) conforming to IEEE802.3az (LPI). When there is no data transmission at link up, the energy-saving state automatically starts so that power consumption can be reduced on each port.
(9) Due to the loop detection/shutoff function, a port where loop has occurred can be automatically shut off to prevent loop failures.
(10) The ports which the loop has generated are displayed via the LED, and the network administrator can specify the ports which the loop has generated after the loop is resolved via the loop history functions. (11) The Ring Redundant Protocol (RRP) is supported, allowing to make a redundant network via ring topology.
TMV INTER TRADING บริษัทผู้จัดจำหน่ายระบบรักษาความปลอดภัย ราคาส่ง ถูกที่สุด